UNIA ARES P, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 34

OPERATING AND MAINTENANCE MANUAL ARES P / ARES ROLLER UP
- 19 -
4. Adjustment of the Cultivator
4.1 Working Depth Adjustment
• Adjustment with the turnbuckle consists of rotating the turnbuckle
[A]
to left or right side,
through which the machine rear roller is lifted up or lowered
• Perform hydraulic adjustment by pressurizing the cylinder [B] from the tractor cab, which
extends the cylinder. Then, put on the required number of stops [C] and pressurize the
cylinder [B] again to slide it back to the stops [C] . Through this, you can raise or lower the
rear roller of the machine. Secure the cylinder [B] against dropping down with the lever [D] .
Fig.:9 Depth adjustment on the roller