UNIA ARES P, Руководство по эксплуатации и техническому обслуживанию

Страница: 29 / 34

OPERATING AND MAINTENANCE MANUAL ARES P / ARES ROLLER UP
- 27 -
Items not specified (applies to the remaining machines); lubricate every 300 ha.
5.7 Storage of the Cultivator
Clean the machine from soil each time after finishing work and then inspect all parts and assemblies.
Replace any worn or damaged parts with new ones. Tighten any loosen screw connections. Store the
machine on hardened surfaces.
After the season:
• clean the cultivator thoroughly
• lubricate the machine at the lubrication points specified in Table 3
• wash faces of the coulter discs, rollers and hitch axle pivots with kerosene and protect them
against corrosion applying grease with brush
• repair spot defects of the paintwork by repainting
• when the machine is to be stored outdoors in winter – disassembly the hydraulic cylinder
together with the hoses and keep them in a dry, well ventilated and possibly darkened room
5.8 Disassembly and Disposal
After its working life, the cultivator is to be scrapped. Disassembly should be performed by a
specialized company.
Item Designation Component Grade of lubricant Lubrication
interval (ha)
1 A Suspension axle joints (2 pc.) ŁT -4S-3 grease 100
2 B Screws, turnbuckles (cylinder heads) -II- 200
3 C Coulter disc bolt (TX/TWIX) -II- 50
4 D Chassis bolt -II- 100
5 E Wheel hub -II- 200
6 F Cylinder heads -II- 200
7 G Screws, turnbuckles (cylinder heads ) -II- 200
8 H Bearings -II- 20
9 I Cylinder heads -II- 200
10 J Coulter disc bolt (TX/TWIX) -II- 50
11 K Bearings -II- 20