UNIA Ares HP, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 28

OPERATING AND MAINTENANCE MANUAL ARES HP
- 19 -
4.3. Bolt, screw and nut tightening torques (Nm)
Fastener class
Size Pitch P
6.8
8.8
10.9
12.9
1. 2. 3. 4. 5. 6.
M4 0,7 2,4 3,2 4,5 5,2
M5 0,8 4,5 6 8,4 10
M6 1 8 11 15 17
M8
1,25 18 27 34 40
1 16 21 30 35
M10 1,5 35 46 65 76
1,25 31 41 57 67
1 27 36 50 59
M12 1,75 59 79 111 129
1,25 49 65 91 107
M14 2 92 124 174 203
1,5 76 104 143 167
M16 2 127 170 237 277
1,5 104 139 196 228
M18 2 194 258 363 422
1,5 135 180 254 296
M20 2,5 250 332 469 546
1,5 172 229 322 375
M22 2,5 307 415 584 682
1,5 212 282 397 463
M24 3 432 576 809 942
2 322 430 603 706
M27 3 640 740 1050 1250
2 480 552 783 933
M30 3,5 755 1000 1450 1700
2 560 745 1080 1270
4.4. Hydraulic System
•
Drain all oil remaining in the hydraulic system before first start and fill the system with oil
recommended and used in the tractor connected to the machine.
• Check the hydraulic system and cylinders for leaks every day and remove any leakages as
soon as possible.
• Take care of the cleanliness of the cylinders and especially their piston rods.
• Unfold the machine and set it in the parking position, and depressurize the system before
beginning any work at the hydraulic system.
• Only connect and disconnect the hoses to and from the tractor when the hydraulic system is
depressurized.
•
Replace the hydraulic hoses after five years of operation of the machine at the latest.