UNI-TROL PO-22H, Инструкция по эксплуатации

Страница: 20 / 29

Basic operations before the straightening machine operation
An operator of the straightening machine should:
- read the detailed manual instruction;
- listen to the commands and instructions of the professional supervisor concerning
safe and correct task fulfilment;
- consider how to work safely to fulfil one’s task;
- prepare necessary helpful workshop equipment, tools, personal protectors (if
necessary);
- prepare the work place to fulfil the given tasks;
- report all the faults or hazards immediately to the supervisor in order to remove
them quickly.
Other operations before the straightening machine operation
Substantial operations during a wheel rim straightening:
- mount the wheel rim;
- in case of power failure, turn off the straightening machine immediately;
- focus only on the substantial (safe) operations while using the straightening
machine;
- do all your tasks accurately, according to the current manufacturing process;
- do only the tasks ordered by the direct supervisor;
- report all the work accidents immediately to the direct supervisor;
- in case of a work accident, leave your work place in the same condition in which the
accident happened, until the emergency team arrives;
- in case of any doubts concerning safe task fulfilment, listen to the instructions of
your supervisor and observe all his commands.
Basic operations after work:
- turn off the straightening machine and protect it from undesirable turning on;
- clean your work place carefully;
- clean and put away your personal protectors;
- check if your work place will not be hazardous after your departure.
15.0 ELECTRICAL SYSTEM SCHEME
1. HYDRAULIC PUMP MOTOR
2. DRIVE MOTOR
3. HYDRAULIC PUMP MOTOR CONTACTOR
4. DRIVE MOTOR CONTACTOR
5. HYDRAULIC PUMP SWITCH
6. DRIVE MOTOR SWITCH
7. ELECTROMAGNETIC COIL DEMOUNTING HYDRAULIC ADAPTER
8. ELECTROMAGNETIC COIL MOUNTING HYDRAULIC ADAPTER
9. HYDRAULIC ADAPTER DEMOUNTING SWITCH
10. HYDRAULIC ADAPTER MOUNTING SWITCH
11. TIME RELAY
20