Uni-trol Co. Ltd. , ul.Estrady 56, 01-932 Warsaw, Poland
Ph./Fax + 4822 817 9422 e-mail: [email protected]
5
- an effective grounding circuit which has been previously checked.
Prohibited is a
connection the grounding wire to the gas or water supply pipes, telephone line or
any other installation.
5. INDUSTRIAL SAFETY
The manufacturer shall not be liable for any damages arising from modifications to the machine
which were not previously authorised. Removing or modifying the safety devices is not compliant
with the European regulations.
5.1. RULES FOR THE OPERATOR
- The operator must avoid hazardous situations during work.
- In case the machine is working improperly, turn it off and call the customer service.
-
Remove from the machine’s surrounding all the items which may be hazardous
during operation. Make sure there is no oil on the floor which may be hazardous
for the operator.
- For protection from dust and other externals, the operator must wear a special
clothing, goggles and protective gloves.
- During work you must take off your bracelets, rings, watches, and other loose
decorations. The operators with long hair must tie it back so that they could work
easily. The operator ought to equipe a suitable shoes.
5.2. TECHNICAL SERVICE, REPAIRS AND SPARE PARTS EXCHANGE
- Servicing, maintenance work and spare parts exchange must be carried out by
authorised personnel.
- Before any service work, disconnect the machine from the power supply.
- You must not use spare parts other than those supplied by the manufacturer.
-
The machine’s spare parts and accessories have to meet safety regulations.
6. STORING
If the machine is to be stored for a long time, it must be disconnected from the power supply, with
the oil tank emptied, and covered to protect it from externals (dust, oil mist etc.). The parts which
might get damaged in case they dry out have to be lubricated.
7. SCRAPPING
When the machine is going to be scrapped, all the electric and electrical parts as well as those
made of plastic have to be disassembled, while the rest has to be scrapped as the steel scrap.
The electric wires can be scrapped as the copper scrap.