UNI-T UTS3000B/A Series Скачать руководство пользователя страница 17

Страница: 17 / 78

Do not

operate in

flammable

and explosive

environment

Do not use this device in a flammable and explosive environment to avoid product

damage or personal injury.

Caution

Abnormity

If this device may be faulty, please contact the authorized maintenance personnel of

UNI-T for testing. Any maintenance, adjustment or parts replacement must be done

by the relevant personnel of UNI-T.

Cooling

Do not block the ventilation holes at the side and back of this device;

Do not allow any external objects to enter this device via ventilation holes;

Please ensure adequate ventilation, and leave a gap of at least 15 cm on both sides,

front and back of this device.

Safe

transportation

Please transport this device safely to prevent it from sliding, which may damage the

buttons, knobs or interfaces on the instrument panel.

Proper

ventilation

Poor ventilation will cause the device temperature to rise, thus causing damage to

this device. Please keep proper ventilation during use, and regularly check the vents

and fans.

Keep clean

and dry

Please take actions to avoid dust or moisture in the air affecting the performance of

this device. Please keep the product surface clean and dry.

Note

Calibration

The recommended calibration period is one year. Calibration should only be carried

out by qualified personnel.

Содержание UTS3000B/A Series















































































Результаты поиска

Содержание UTS3000B/A Series

Отзывы:

Похожие инструкции для UTS3000B/A Series

Бренды по названию

Популярные бренды

UNI-T UTS3000B/A Series, Руководство пользователя

Результаты поиска

Содержание UTS3000B/A Series

Отзывы:

Похожие инструкции для UTS3000B/A Series

Бренды по названию

Популярные бренды