UNI-T UTG1000X Series, Руководство по программированию

Страница: 5 / 51

Programming Manual UTG1000X Series
Instruments.uni-trend.com
5 / 51
SCPI Explanation
IEEE488.2 General Command
*IDN?

Syntax
*IDN?

Description
Query for manufacture name, product model, product serial number and software version number.

Return Format
The query returns manufacture name, product model, and product serial number. The software version is
separated by dot mark.

For Example
UNI-T Technologies, UTG1000X, 000000001, 00.00.01
*RST

Syntax
*RST

Description
To restore the instrument to its factory default settings, clear all the error message and send and receive
queue buffers.
SYSTem Command
It is used for the basic operation of the signal source, including voice selection and system data setting.
:SYSTem:CONFigure

Syntax
:SYSTem:CONFigure <file>
:SYSTem:CONFigure?

Description
Write/read the configuration file. Send the instruction at first, and then send the configuration file data to
the signal source.
<file> represents the configuration file.

Return Format
The query returns the currently configuration file data of the signal source.

For Example
:SYSTem:CONFigure
Write the configuration file data into the signal source and load it.
:SYSTem:CONFigure?
The query returns the currently configuration file data of the signal source. It’s binary system.