User can move cursor for measurement under
CURSOR mode. There are 3 modes, namely, voltage,
time and tracing.
V can be measured by pressing
SELECT and COARSE keys on the panel and multi-
purpose knob controller to adjust positions of 2
cursors respectively during voltage measurement.
Similarly, it can be measured if selecting time. Cursor
of digital storage oscillograph can also trace signal
variation automatically under tracing mode with
waveform display.
Remark: For 5.7-inch oscillograph
1. Effect of SELECT key is to select the cursor.
2. Effect of COARSE key is to adjust movement speed
of cursor.
For 7-inch oscillograph:
User can press multi-function knob key to select the
cursor. Movement speed of cursor can also alter
according to rotation speed.
1. Voltage/time measurement mode: The first or
secondcursor will appear at the same time. Cursor
position on the screen can be adjusted by multi-
purpose knob controller. User can press SELECT key
(or multi-function knob key) to select cursor to adjust.
Displayed reading is also time or voltage between 2
cursors.
2. Tracing mode: Horizontal and vertical cursors can
intersect to become a crossing cursor. Crossing
cursor can position on the waveform automatically to
adjust horizontal position of crossing cursor on the
waveform by rotating multi-purpose knob controller.
Digital storage oscillograph can also display
coordinate of cursor point at the same time.
3. Measurement value will be displayed in upper
right corner of the screen automatically when
opening cursor function.
Operating Manual for UTD2000/3000
69
