25
Model UT81B: OPERATING MANUAL
Figure 3-5. 10A Range Measurement
l
To measure AC 10A or DC 10A currents, set up
the Meter as Figure 3-5 and proceed as follows:
1. Insert the red test lead into the
10A
terminal and
black test lead into the
COM
terminal.
2. Set the rotary switch to
A
.
3. Connect the test lead in series with the return circuit
to be tested.
4. The measured value shows on the display.
5. Press
MODE
button to toggle between Multimeter
mode and Scope mode.
6. Press F1 to toggle between AC and DC current
measurement.
