UNI-T UT602, Руководство по эксплуатации, Страница: 11 / 26

Make sure the Low Battery Display is not on,
otherwise false readings may be provided.
Pay extra attention to the symbol, before carrying
measurement, which is located besides the input
terminals of the Meter.
l
l
To avoid damages to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring resistance.
Warning
The resistance ranges are 20 , 200 , 2k , 20k , 200k ,
2M , 20M and 2000M .
Insert the red test clip into the terminal and
the black test clip into
COM terminal.
Set the rotary switch to range.
Connect the test clips across with the object being
measured.
The measured value shows on the display.
1.
2.
3.
To measure resistance, please connect the Meter as
follows:
11
Model UT602/603: OPERATING MANUAL
Measurement Operation
A. Measuring Resistance
(see figure 3)
(figure 3)