Figure 22
Model UT232: OPERATING MANUAL
28
The double display shows the second phase value
of power factor PF and phase angle PG.
Press
SELECT
again to choose the third phase
3
,
see figure 22.
The double display shows the third phase value of
power factor PF and phase angle PG.
5. When measuring 3 phase 3 wires:
The first phase and second phase operating
method is same as three phase 4 wires.
Jump over the third phase measurement.
6. MAX/ and MIN/
are not valid when measuring
power factor.
When testing has been completed, disconnect the
connection between the testing leads and the circuit
under test and remove testing leads from the input
terminals.
Note
