UNI-T
®
Uni-Trend Group Limited
Chapter Three: Installation guide for UT2000_3000 Series Computer
Testing & Control Software
1. Hardware
There are one USB device communication port and one RS-232 communication port
for computer connection on the rear panel of the UT2000_3000 Series digital storage
oscilloscope. By connecting a host (computer or control computer) to any one of the
two ports, you can control the oscilloscope with the host from a remote location.
2. Installing the driver
Take the USB A-B lead. Connect one end to the USB terminal of the host, and the
other end to the USB Device terminal on the rear panel of the oscilloscope. Power on
the oscilloscope and turn on the oscilloscope’s power. “Found New
H
ardware” will
appear at the right bottom corner of the operating screen of the host, as shown below:
You will also see an icon prompt that says “Found New hardware – UT2000/3000
Series Digital Storage Oscilloscope”.
A “Found New hardware” dialogue box will pop up in a little while, as shown below:
13
Uni-Trend Group Limited
. All right reserved 2007
___________________________________________________________________________________________
User Manual for UT2000_3000 Series Computer Testing & Control Software
