P/N:110401104363X
Ƴ/
near the input terminals
Multimeter Description
Rotary switch
Input Terminals
Measuring DC Voltage
Measuring Resistance
Measuring Capacitance
Measuring Frequency
Measuring Temperature
Testing Diodes and Continuity
Auto Power Off
Measuring AC Voltage
Measuring DC current
Measuring AC Current
1) Insert test leads into input terminals(Red to V and black to COM).
2) Set the rotary switch to
range; Connect test leads to the power or load under test,
and the positive polarity of the test end will indicate.
1) Insert test leads into input terminals(Red to V and black to COM).
2) Set the rotary switch to V range; Connect test leads to the power or load under test.
,QVHUWWKHEODFNWHVWOHDGLQWR&20WHUPLQDO)RUFXUUHQWP$LQVHUWWKHUHGWHVWOHDGLQWR
mA terminal. If current goes up to 10A, insert red test lead into 10A terminal.
2) Set the rotary switch to A range; Connect test leads to the tested circuit in series.
The polarity of red test lead will show.
,QVHUWWKHEODFNWHVWOHDGLQWR&20WHUPLQDO)RUFXUUHQWP$LQVHUWWKHUHGWHVWOHDGLQWR
mA terminal. If the current goes up to 10A, insert red test lead into 10A terminal.
A
2) Set the rotary switch to A range; Connect test leads to the tested circuit in series.
,QVHUWWHVWOHDGVLQWRLQSXWWHUPLQDOV5HGWRȍDQGEODFNWR&20
6HWWKHURWDU\VZLWFKWRȍUDQJH&RQQHFWWHVWOHDGVWRWHVWHGUHVLVWRULQSDUDOOHO
all capacitors
1) Although the capacitance ranges have been protected internally, you still need to discharge
all tested capacitors so as to avoid any damage to the instrument or any measurement error.
1) Insert test leads into input terminals(Red to Hz and black to COM).
2) Set the rotary switch to kHz range; Connect test leads to frequency source. You can read
the frequency reading directly from the display.
1)
1)
2)
terminals
,QVHUWWHVWOHDGVLQWRLQSXWWHUPLQDOV5HGWR9ȍDQGEODFNWR&20IRUWKHUHGWHVWOHDG
Then set the rotary switch to
、
; Connect test leads to tested diode. The displayed
reading is the approximate value of forward voltage drop of diode.
2) Connect test leads to the circuit under test, if the resistance between two tested ends
is
＜
ȍWKHEXLOWLQEX]]HUVRXQGV
Auto Power Off
power off,
ƴ/
randomly
voltages higher than 1000V DC or 750AC RMS.
current ranges
test leads
the test leads from input terminals.
Ƶ/
Operating Manual
Test Leads
1 pc
1 pair
1 pc
