Uni-ram UG5000W, Руководство по эксплуатации

Страница: 18 / 28

MANUAL - SPRAY GUN CLEANERS - UG5000W SERIES Revision 2019-3
18
Trouble shooting continued
SYMPTOM
REASON CORRECTIVE ACTION
INSIDE WALL OF TANK IS
COATED WITH PAINT EVEN
THOUGH OPERATOR
MAINTAINS TANK
Liquid lacks cleaning strength
Replace solvent / water and AQUA-
KLEEN in pail. Consider a solvent
that is formulated for type of paint
used and for use with automatic
spray gun cleaning.
Trigger not locked in open
position
Use Trigger Lock Spring PN 120-350
Spray gun is not properly
installed on to nozzle
Re-install with proper adapter
Incompatible solvent
p p
solvent formulated for type of paint
Low pressure in air supply
p
of 85 PSI
Plugged jets
y g
through the jets. If not successful,
SOLVENT APPEARS RED or
ORANGE Water in solvent is corroding
metal pail
Replace or recycle wash solvent
GUNS NOT CLEAN, WASH
SOLVENT IS MILKY WHITE Wash solvent is contaminated
with water
Replace or recycle wash solvent
Not enough liquid in clean
rinse pail (right side)
Add liquid
Rinse Pump is leaking from a
crack caused by corrosion
due to acidic or chlorine
contaminated solvent
Replace rinse pump, PN URP-100SF
Faulty Valve
CLEAN RINSE IS DIRTY
Replace Combination Valve, PN
UVB-400KIT
GUNS NOT CLEAN, PUMP
WORKING, SOLVENT FLOW
NORMAL
CLEAN RINSE DOES NOT
WORK