•
Keep your tools clean. Dirt from tools may enter the inner machine mechanism and cause damages to the
tools or machine.
•
Do not use aggressive cleaning solution or paint thinners to clean the machine.
•
Clean plastic parts with soft cloth dipped in soapy water.
•
Clean and lubricate metal surfaces with a cloth dipped in paraffin oil.
•
Store the machine well lubricated in a dry place to protect it from corrosion and rust.
Lubrication
•
Keep the spindle threading clean and lubricate it with an appropriate type of grease.
•
During work, make sure the spindle threading and the nut are well lubricated to increase the threading
lifespan. Lubrication also enables you to use less force during work.
When the operational life of your device is over, dispose off it in accordance with valid rules and regulations.
Your product is made of metal and plastic parts that may be recycled when separated.
1.
Disassemble all parts.
2.
Separate all parts according to the material they are made of (e.g. metals, rubber, plastics, etc.).
Take the separated parts to the recycling facility near you.
Information about the locations of recycling centres may be found at your local City office or throughout an
Internet search.
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material.
We are not liable for damages occurred during shipping due to improper packaging.
Note:
Pictures and contents in this manual may slightly differ from the actual product or accessories.
It is due to continuous improvement of our products. Such small differences have no effect on the product
functionality.
6
MAINTENANCE
DISPOSAL
CAUTION
3
???
•
This device may be used by a qualified person, 18 years or older who has been
trained in work and environmental safety procedures.
•
Any person using this equipment must possess a medical certificate
demonstrating his eligibility to operate this equipment.
Symbols used in this manual
Warning!
This symbol informs you about the risk of personal injury or damage to the machine
or materials.
Warning!
Risk of damage.
Note:
Additional information.
Use personal safety gear.
General instructions
•
Plastic packaging materials pose danger to children and animals.
•
Make sure you know how to control your tool or machine and that you are familiar with its operating
procedure. Know the hazards that may occur, if not used correctly.
•
If other person is using this machine make sure that he knows how to safely operate this equipment and
that he is familiar with hazards and risk that may occur, if not used correctly.
•
Pay special attention to safety notes and safety labels on the machine. Never remove or damage them.
If the warning label becomes unreadable, please contact your vendor.
•
Keep your working place clean. Dirty and disorganized workplace may cause accidents.
•
Never work in tight spaces or in purely lit rooms. Make sure the floor is solid and stable and that you can
move around easily. Always keep stable posture.
•
Keep focusing and use common sense. Do not continue working if you cannot pay attention.
•
Maintain your tools clean and in safe working conditions.
•
Handles must be kept free of grease and dirt.
•
Make sure no children, unauthorized persons or animals have access to your workshop.
•
Never put your hands or legs inside the working area.
•
Never leave your machine unattended during operation.
•
Use only for purposes for which it has been designed.
•
Use personal protective gear such as safety goggles, ear protection, respirator, safe working shoes etc.
•
Do not overreach, use both hands.
•
Never work under the influence of alcohol or other drugs.
SAFETY PRECAUTIONS
