Metal turning operations
•
Always securely fasten the work piece on the work table using appropriate clamping equipment or vise.
Do not hold the work piece in your hands during work. Use both hands to hold the handles of the
machine/tool.
•
Do not overreach. Maintain stable posture on both legs. That way you will not be thrown out of balance in
case of a reverse impact.
•
Keep your tools clean and sharp.
•
When changing tools or during maintenance, follow safety instructions.
•
To feed or move the work piece use appropriate extension tool.
•
Make sure the work piece complies with required technical parameters and that is securely fastened.
•
Use extra caution during releasing the object.
Grinding and polishing
•
Move the machine slowly. Make sure not to apply too much pressure on the polishing wheel. Otherwise
the wheel may get damaged, stuck or may break into pieces.
•
Make sure that flying debris will not endanger persons or animals standing by or yourself.
Power equipment
•
If your machine is equipped with depressed springs, use suitable device to release them slowly and safely.
•
According to the warranty policy, carbon brushes, polishing wheel and polishing covers are considered as
expandable parts and are not covered by warranty.
•
Before throwing the packaging material out,
make sure no part is left inside. If so, take it out
and install it. Use the part listing for check-up
and the installation drawing for guidance.
•
Before use fasten the handle to the machine
with 2 screws 59. Tighten them securely.
•
Place and screw in the driving wheel (supplied)
on the polisher driving shaft.
6
ASSEMBLY
11
???
DETAILED DRAWING
