Troubleshooting
No Video On Monitor
There can be several factors as to why the Monitor does not display any video.
Please check the following if this occurs;
1. Verify that the camera is on the same camera input as shown on monitor.
(eg. If monitor shows CH2, make sure the camera is connected to AV2)
2. Could there be a bad connection somewhere?
- check that the harness is connected to the camera
- verify the trigger source is supplying power
-
Diagnosis 1:
connect any known working camera to the harness
-
Diagnosis 2:
swap out the harness with a known working harness
Video On Screen Is Choppy / Not Good / Blurry
This typically happens if the cable is loose, damaged or there may be some
sort of electrical interference nearby;
1. Ensure that the connections are tight from the monitor to harness and
from harness to camera.
2. Ensure cables are stored away from any possible electrical interference.
(ie. radio devices, heavier cables, LED lights, switches, etc.)
3. Try swapping out the camera with another camera if problem persists.
Monitor Will Not Turn ON
This problem occurs because of power / ground issues.
Please check the following if this occurs;
1. Conduct a HARD RESET, unplug everything, leave aside for 2 minutes, then
reconnect everything
2. Check all the fuses used for this system are in working condition
3. Check both the ground & power connections, ensure connections are tight
4.
Inconsistent Voltage/Current Issue:
Try connecting power & ground directly
to battery
No Audio
Make sure the camera with audio function is connected to AV1 (this is the
only channel with sound support)
1. Verify the volume setting is ON
2. Verify the chosen camera has audio function
12
