P.1
of transmitter, and then move the speakers to other free location. You can
re-adjust the tuning control by moving it either channel 1 or 2 of the transmitter,
then pressing “AUTO SCAN” button for best reception.
When transmitting / receiving over long distances, the signal from the system
will become weaker.
7. Switching
Off
a) For protection of the transmitter and power saving, the transmitter will cut
off automatically if there is no/weak operation input signal from audio
source for 4 minutes.
In other words, if the signal comes back, the transmitter will work again
automatically.
b) Press the “POWER” button to turn off the speaker and the LED light goes
off.
TROUBLE SHOOTING
NO SOUND
-
Ensure the AC/DC adaptor is fully inserted into the AC outlet and the
power connection input on the transmitter.
-
Ensure the speaker is switch ON.
-
Speaker’s battery capacity is too low, replace with new batteries or
connect the AC/DC adaptors to the speakers.
-
Ensure the TV or audio component is ON.
-
The connected audio / video equipment is not playing. Start playing the
equipment.
-
The volume of speaker is too low, adjust the volume to an appropriate
level.
DISTORTED
-
Press the “AUTO SCAN” button on the speakers until matching the
frequency of the transmitter.
