background image

Page 12

SELF-STANDING FAMILY TENT 

UNHCR Item No 00008154

Technical Specifications

3.1 General 

description of the main outer tent:   

The tent must comprise several PE cloth sections, forming the general shape of the tent. The seams must run from the top centre down to 

the floor level, avoiding horizontal lines wherever possible. The outer tent must be supported by three cross arches, two entrance arches, 

and one ridge pipe. It is secured with 18 guy ropes on reinforced attachment points.

3.2 

Dimensions / erecting system: 

Centre height: 

approx. 2.40 m

Width: 

4.30 m

Length: 

4.30 m

Ridge length:

4.40 m

Entrance walls height:             

1.9 m

Doors height:

1.70 m

2. GENERAL POINTS FOR THE FINISHED PRODUCT

2.1 Performance:

The final product must be able to withstand 75 km/h winds, strongly attached to the ground and tensioned without damage. When closed, 

the  tent  must  give  good  protection  against  dust,  wind,  rain,  snow,  insects  and  small  crawling  fauna. The  final  packed  tent  weight  is 

approximate

ly 52 kg. 

2.2 

Fire resistance:

The product must be flame retardant to a level that allows users to evacuate the tent in a minimum of two minutes, in case of fire. The safe 

spacing distance between the guy rope points must be 2 m.

2.3 

Seams and stitching:

All seams subject to possible tension are double-lock stitched and waterproofed. Stitching should produce a strong, long-lasting, neat and 

professional looking seam. 

The stitch count as well as UV and rotproof sewing threads are appropriate and adapted to each fabric. It allows for strong waterproof 

seams with at least the same life span as the tent. 
The seams are always oriented in order to let the rain run freely, to avoid retaining water lines or water pockets. Wherever possible, the 

colour of the sewing thread is adapted to the fabric colour. 

2.4 

Ropes, webbing bands, toggles, loops, reinforcement nettings, and all other accessories:

All ropes and webbing bands must be heat cut. All ropes are knotted to the tent at the factory. All of the above mentioned items must be 

rotproof and UV proof (to the same degree as the tent canvas to which they are sewn). To avoid water penetration through capillary action, 

no webbing or rope can be sewn using a stitch that runs from the outside to the inside of the tent; alternatively, they must be made from 

waterproof materials. The laces and loops of the main tent and shade net can be made from the same PE material or PES material as that 

of the tent. Inner tent loops can be made from the same canvas to which they are sewn.

2.5 

Zipper fasteners:

All the zipper fasteners should conform to a resistance of 700 N lateral traction under ISO5912.

2.6 Eyelets

All metal eyelets should be rustproof and correctly placed, reinforced with a fabric patch and have a minimum inner diameter of 10 mm.

 

2.7 

Metal rings

All metal rings should be rustproof, galvanised and welded closed. 

2.8 

Dimensional tolerance

Unless otherwise specified, a maximum tolerance of ± 3% is accepted on all dimensions. 

2.9 

Long storage (shelf life)

The tent is treated and packed in such a way that it can be stored for a minimum of five years in proper storage conditions without any 

damage or performance reduction, including in humid countries. The stored tent should be elevated from the ground (on pallets and pallet 

racks) in a dry, clean and ventilated warehouse. The tent must be manufactured and packed in clean and appropriate conditions to avoid 

contamination from soil dust and other contaminants

3. COMPOSITION OF THE OUTER TENT WITH GROUND SHEET

The  tent  is  suspended  to  the  pipes  and  maintained  in  position  by  120  mm  high 

sleeves to insert the pipes.There are three continuous sleeves for the cross arch 

pipes. At the centre of the tent these sleeves are not interrupted. The sleeve ends 

are located 500 mm above the ground. There is one continuous sleeve for the ridge 

pipe. At the centre of the tent this sleeve is continuous. The length of this sleeve is 

2 m. The entrance walls are attached to the arches with hooks mounted on 20 mm 

webbing. the sleevs are of the same color of the pipes (4 different colors in total).

Содержание 00008154






















Отзывы: