11
Unger recommends testing the water supply for TDS prior to use in order to
determine approximately how many times you can rinse your vehicle before
replacing the resin filter.
INSPECT THE RINSE 'N' GO MAX™ SYSTEM PRIOR TO USE
Inspect system for leaks, cracks, or dents and proper fit of top cap assembly.
Ensure hoses are properly attached and there are no leaks.
PREPARE THE SYSTEM FOR USE:
1.
Locate water supply.
2.
Set up system in upright position.
3.
Choose a stable location where product is securely on the ground to
minimize toppling.
4.
Connect water supply hose (provided) to inlet connection at the bottom of the unit.
5.
Connect garden hose (not provided) to outlet connection.
4.0 USE AND OPERATION
Product needs to be upright for water to flow through resin.
If the product is on its side, water won’t flow through resin correctly,
resulting in spots and/or streaks.
