unGer CleanXpress, Руководство пользователя

Страница: 7 / 12

7
3.0 ASSEMBLY INSTRUCTIONS
3.1 Installing the batteries
• Two AA alkaline batteries are required .
• The battery compartment is located above the cleaning fluid tank.
• Open the battery compartment (picture 1) and insert
2 AA alkaline batteries in orientation shown . (picture 2) .
• Close the door until you hear it click .
• When removing old batteries, always dispose of them in
accordance with applicable federal, state/provincial and local
laws and regulations .
3.2 Attaching the pad
• Attach the pad holder by sliding it around the sides of the the
pivoting spray nozzle (picture 3) . Pad holder will lock in place .
• Continue to push the pad holder into place until it is locked .
• Attach the microfiber pad with the white side facing the device
head (picture 4) .
• Once the microfiber pad is dirty, take it off and wash it in
accordance with the care label .
• The area that can be cleaned with one pad will vary depending
on the condition of the surface being cleaned .
3.3 Adding cleaning solution
• Access the tank to add your cleaning liquid by holding the
product upside down and squeezing the sides of the bottom to
flip open tank cover (picture 5).
• Unscrew the cap by turning counter clockwise (picture 5a) .
• Fill tank with your favorite cleaning solution. Do not overfill
tank . DO NOT USE with creams, gels, abrasive formulas or
chemicals containing bleach . (picture 6) .
• Screw the cap on by turning clockwise . Cap should have a tight seal .
• Close the tank cover .
1
2
3
4
5a
6
5