background image

ITEM NO. : CU-167
REVISED MAR 24, 2016

Printed in Vietnam

- 2

-

Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed  for  durability. All  parts  were  checked  prior  to  packaging  to  insure  quality. Prior  to
beginning  assembly,  however,  make  sure  all  parts  and  hardware  are  included  and  free  of  obvious
defect. If  a  part  is  missing  or  defective,  please  contact  the  store  where  purchased. If  hardware  is
missing, or you need help with assembly, please call toll free 888-944-8396.

IMPORTANT NOTE:

-

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.

-

Remove all wrapping material, including staples & packing straps before you start to assemble.

-

DO NOT tighten all screws and bolts until completely assembled.

-

Keep all hardware parts out of reach of children.

WARNING:

Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish
of  your  product.  Protect  the  surface  of  the  product  with  cloth  if  you  are  using  any  product
with rubber feet or base

.

BEFORE ASSEMBLY

ASSEMBLY TOOLS REQUIRED

NOT INCLUDED

Содержание CU-167







Отзывы: