ITEM NO.: C-219
REVISED JUL 2, 2012
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long bolt
(
M6x80mm)
4
2
Short bolt
(M6x60mm)
4
3
Lock washer
(
6.5x
11mm)
11
4
Flat washer
(
6.5x
19mm)
11
5
Allen key
(4mm)
1
6
Screw
(M4x35mm)
10
7
Short bolt
(M6x40mm)
3
STEP 1
Attach Seat Frame (B) to the Back (A) with bolts (7) and (1), and Washers (3) and (4). Tighten with
Allen Key (5) as shown below.
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level
surface to make sure the chair is level and then tighten the bolts.