3.1 Hardware Install
Place the ladder under the ceiling mounting position.
Climb the ladder to a comfortable position and place the
bracket flat against the ceiling with the hinges facing
down towards the ground and the logo closest towards
the hitting screen.
2
With the bracket in position, grab 9 silver M4 32mm
screws and screw the first two screws in order according
to the diagram below. Then screw in the rest in any order.
3
1
2
1. Mount Bracket
1
Make sure this center point is aligned with tee position on mat.
The QED Sensor and bracket come attached together in the
box. Slightly loosen the black M6 15 mm screws that are
holding the sensor to the bracket so you can remove it.
