Underwater Lights USA, LLC
Underwater Lights Europe Sarl
3406 SW 26
th
Terrace, C-6/7
2323, Chemin de Saint-Bernard
Fort Lauderdale, FL 33312 USA
Space Antipolis 6, 06220 Vallauris, France
Phone: 1-954-760-4447
Phone: 33-(0)-4-97-21-02-96
Fax: 1-954-525-3261
Fax: 33-(0)-4-97-21-10-96
Internet: www.seavision.com
Internet: www.seavision.com
Email: [email protected]
DOC:092305-1
Email: [email protected]
MODEL 12N33R-60, 120-230VAC
BALLOON
PART
DESCRIPTION
1
18042
ENCLOSURE
2
18035
MOUNTING PLATE
3
18003
TERMINAL BLOCK MOUNT
4
18043
FUSED TERMINAL BLOCK
5
18044
CABLE STRAIN RELIEF
6
18045
CABLE STRAIN RELIEF
7
18046
BLANKING PLUG
8
18047
RGB LED DRIVER*
9
18011
M3.5 x 0.6 x 12LG PPHS
10
18013
FAST BLOW FUSE
11
18031
M4 x 0.7 x 6LG SST PPHS
12
18009
M6 x 1.0 x 8LG SST PPHS
13
18039
SURGE PROTECTION DEVICE*
14
18010
M4 x 0.7 x 8LG SST PPHS
15
18049
3-POLE TERMINAL STRIP
16
18050
4-POLE TERMINAL STRIP
*PLEASE CALL FOR OTHER PRODUCT COMPONENT CONFIGURATIONS
120-230VAC
Installation:
The driver box should be mounted in a cool, dry, well ventilated and easily accessible location. Attach the driver box to a fixed
bulkhead or similar secure structure using appropriate M6 fasteners with adequate space between driver boxes for proper cooling.
Note: Whereas the driver box can be placed in any orientation, it is recommended that the cable strain reliefs face down.
Using marine grade cable, run a VAC input line into the driver box and secure using one large cable strain relief. Run cable from
supplied RGB LED Light and shielded DMX cable/s to the driver box and secure by way of remaining cable strain reliefs. Note:
Since the DMX Out cable is an optional feature, it may not exist. Caution! Avoid making tight bends and/or passing cables over
sharp edges/surfaces. Connect cable wire leads inside the driver box per wiring diagram below.
Serviceable Parts:
Upon opening the driver box by unscrewing four captive lid fasteners, replacement of RGB LED driver, surge protection device or
fused terminal block is accomplished by removal and replacement of associated fasteners and wiring. Further, a 10 Amp fuse
located in the terminal block may be pulled out and replaced as required.
Caution! Ensure that VAC power is disconnected and
locked out before servicing driver box.
SV18 RGB LED Driver Box
