8/7L0$7(
ZZZXQGHUZDWHUOLJKWVFRP
7+(8/7L0$7(5$1*(,6'(6,*1('$1'0$18)$&785('%<81'(5:$7(5/,*+76/7',17+(
8.
7\SH:,5,1*'DWH
:/(':,5,1*
Below is a wiring installation the BLUE connection terminal (Dat
a
Connection) is not used.
The light comes with a three core cable Red=Positive, Black Negative and Green for connecting to the ANODE through
the two way fused connection enclosure.
There is also an exposed green cable which must be connected to the earth on
the securing ring.
Note the green cables are connected together
in the enclosure
as shown on diagram below
.
Using this system it is possible to use one light which is connected from the earth on the securing ring to the ANODE to
earth all lights. To use the earth output connection in the enclosure connect a single core cable from enclosure to the
ANODE and this will connect the lights to the ANODE
*The
picture
below
shows a very important procedure in
checking that the light is connected to the insert.
*
ULTi MATE 80 CABLE CONNECTION
*
Using an OHM meter, connect the light bezel to the anode. The ohm value should be less than 1 ohm.
