12
DIAL POSITIONS
The Novo has five main menus that can be selected similar to a rotary dial by
simply pressing the corresponding menu button. When a button is pressed, a
small red LED will illuminate providing confirmation of the selected menu.
This is the primary position when operating
decoders from a host controller. The screen will
display any station(s) currently operating and
the total current draw of all stations operating
in milliamps (mA).
Note: Many host irrigation controllers only operate 2 stations at one time.
Note: The Novo cannot operate stations automatically from the host
controller and a station manually at the same time.
This menu is commonly used when the
system is shut-off typically associated with
“winterization” or if repairing or extending the
2Wire path. In this mode scheduled irrigation
commands from the host controller will not
operate and AC power to the 2Wire path
is de-energized.
Faults identifies when a station is not working.
The problem may be the
2Wire path,
A decoder,
A station solenoid.
The Diagnostics menu provides two separate
functions:
Determines if a command is received
between the Novo and a host controller.
Allows a user to reset decoder threshold
settings. See the Troubleshooting section
for more details.
