Place tool over rod and inside sprinkler body
Rotate tool counter clockwise to remove body
STEP 2
Remove cap and inside components
Insert telescopic rod to desired length into sprinkler body & fitting
STEP 1
STEP 3
Place new sprinkler body over rod and into ground
Push down and rotate tool clockwise to connect sprinkler
body to pipe and remove rod
STEP 4
Replace new sprinkler components and cap
THE ULTIMATE ALL-IN-ONE DEVICE FOR REPAIRS/MODIFICATIONS
RAISE SPRINKLER
•
OPTION
It’s a snap with
EasyOut
™
…
Easily increase the spray head height
to grade by removing the sprinkler and
screw on a standard PVC or Cut-Off
fitting to the bottom of the sprinkler.
2
options to choose from
. Add additional
PVC fittings to increase height.
Remove existing sprinkler
Attach drip tubing to 7mm
barb drip fitting
Pass drip tubing through tool,
Attach drip fitting to Hex on
tool, Screw drip fitting/tubing
to pipe
Converting spray heads
to drip using
EasyOut
™
tool is simple and fast.
SPRAY HEAD DRIP CONVERSION
•
OPTION
Scan for more info:
UNDERHILL INTERNATIONAL CORP.
www.underhill.us
• tel: (949)305-7050
Easy
SPRINKLER REMOVAL TOOL FOR
ROTORS
&
SPRAY HEADS
Fits Major
Spray Head
( ½˝ inlet )
Brands
Rotors
( ¾˝ inlet )
&
Hunter
Rain Bird
Toro
K-Rain
Irritrol
Weathermatic
Hydro-Rain
Orbit
Fits all bodies with max 2½˝ I.D.
Remove & Replace
Heads in
minutes
or less
3
EasyCap
™
makes plugging off any
unwanted sprinklers super easy & fast…
A BIG labor savings.
Remove spray head and insert the
EasyCap
™
fitting (part # A-EO-05EC) to
the bottom of the
EasyOut
™
tool and
screw in the
EasyCap
™
fitting…that’s it!
SPRAY HEAD CAP-OFF
•
OPTION
½˝
NPT
ordering
Part #
:
A-EO-05EC EasyCap
™
½” female FPT fitting
A-EO-SRT-RS EasyOut
™
2in1 Sprinkler Removal
Tool for Rotors & Spray Heads