UnderCover TONNEAU 3021, Руководство по установке

Страница: 12 / 16

Your 30-minute installation job is now complete. Now, in less than one
minute, you will be able to put on and take off your tonneau cover. Congratulations!
Release strut off of ball stud
Picture B . Holding tonneau up with
one hand, place loose end of strut
on storage clip
Picture C . Repeat for
the other side.
Turn twist knobs until they
release Picture A.
Go to the rear of the truck
and pull Tonneau cover back,
releasing the post from the hinge
slot,
Picture D . You are now ready
to lift the cover off.
STEP 1
STEP 2
STEP 3
Place tonneau on the truck
and follow instructions on Page 7 .
Be sure that the front flap
seal is hanging over the bulkhead
and not rolled under, see
Picture E
on this page.
Reinstall struts as seen in
pictures Pictures F and G on this
page.
STEP 1
STEP 2
STEP 3
FORM # IG3021HH
Modified Mar 2009
Page 11
Model 3021 Dodge Ram 8' Bed 2002-2008