Figure 11
Figure 10
Figure 9
HOW TO ADJUST THE FOCUS
•
Turn focus dial until the projected image is
sharp (Figure 9). The edges of the projected
image may appear slightly out of focus or
stretched compared to the center of the
image. This is due to the nature of the lens and
flatness of the projection surface, and is not a
malfunction.
ADDITIONAL FEATURES
Auto-Off Timer
•
Press timer button once for a 30-minute
projection duration. The LED with “30” marked
above it will glow green. The projector will
automatically shut off after 30 minutes
(Figure 10).
•
Press timer button again for a 60-minute
projection duration. The LED with “60” marked
above it will glow green. The projector will
automatically shut off after 60 minutes
(Figure 10).
•
Press timer button a third time to cancel
auto-off function (Figure 10).
•
If timer is not set for 30 or 60 minutes, the
projector will shut off automatically after 2
hours.
Auto-Rotation
•
Press move button to start auto-rotate
function. The LED above the move button will
glow green. The projected image will continu-
ously rotate, one full revolution per 10-minute
interval (Figure 11).
•
Press move button again to shut off auto-
rotate function.
7
