background image

 Instruction Manual

6

7

 

Minute

 – Press 

DATE/TIME SET 

button again (minute will flash on LCD screen).  Press [   ]

 

“UP” ADJUSTMENT 

button or [   ] 

“DOWN” ADJUSTMENT 

button until correct minute 

appears on LCD screen.

2.   Press 

DATE/TIME SET 

button again to exit the date/time set mode and return to normal 

mode.

 

If you do not manually exit date/time set mode and return to normal mode within 30 

seconds, clock will do so automatically.

 

Once entering date/time set mode (year flashes), you can push 

DATE/TIME SET 

button to 

toggle through to the date or time element you want to re-set.

 

Press [   ]

 “UP” ADJUSTMENT 

button to select standard (12-hr) or military (24-hr) time.

LCD Backlight

Push 

SNOOZE 

button to turn on backlight.  Backlight will automatically turn off after a few 

seconds.

Setting the alarm

1.    Press the

 ALARM SET 

button to enter alarm set mode.  “AL” will appear under  “DAY” on LCD 

screen.

2.    Press and hold 

ALARM SET 

button until a dash flashes under “MONTH” on LCD screen (do not 

set a month).  

 

Hour

 – Press 

ALARM SET 

button twice; do not set a month or date (hour will flash on LCD 

screen).  Press [   ]

 “UP” ADJUSTMENT 

button or [   ] 

“DOWN” ADJUSTMENT 

button until 

desired hour appears on LCD screen.

 

Be sure to set hour for desired AM or PM time as shown on LCD screen.

 

Minute

 – Press 

ALARM SET

 button again (minute will flash on LCD screen).  Press [   ]

 “UP” 

ADJUSTMENT 

button or [   ] 

“DOWN” ADJUSTMENT 

button until desired minute appears on 

LCD screen.

 

If month and date are set while in alarm set mode, alarm will function only on that particular 

month and date.

3.   Press 

DATE/TIME SET

 button to exit alarm set mode.

Selecting the alarm sound

Use the ALARM SOUNDS SELECTOR to choose from four “space sounds”: 

BEEP

TRANSPORT

BEACON

 or 

ANALYZE

.

Using the alarm

 Alarm 

on

 – Press [    ] ALARM ON/OFF button so that alarm-on indicator appears on LCD 

screen. Alarm is now enabled and will sound at desired time.

 Snooze 

– You can press SNOOZE button for a few minutes of extra sleep when alarm sounds.  

Alarm will automatically sound again after 5 minutes.

 Alarm 

off

 – Press [    ] ALARM ON/OFF button again so that alarm-on indicator disappears on 

LCD screen.  Alarm is now disabled and will not sound.

 Alarm 

reset

 – Press [    ] ALARM ON/OFF button again so that alarm-on indicator reappears 

on LCD screen.  Alarm is enabled again and will sound at desired time.

 

If alarm is not manually turned off when it sounds, it will automatically turn off in 15 minutes 

and reset itself.

Using the projector

Swivel the PROJECTOR to desired angle for ceiling or wall projection. You can project the time 

superimposed over one of three space images, or you can project just the time or a space image 

individually.  Projection works best in a darkened room.

Projecting the time

1.  Press TIME PROJECTION ON/OFF button to turn on time projector.

2.  Turn the TIME FOCUS KNOB to adjust the time projection focus.

Projecting a space image

1.   Press 

IMAGE 

PROJECTION ON/OFF button to turn on image projector.

2.   Turn the IMAGE SELECTOR DIAL to choose from three space images: THE  MOON, STARFIELD 

or SATURN.

3.   Turn the IMAGE FOCUS KNOB to adjust the image projection focus.

 

When AC adapter is used, time and/or image will continuously project until manually turned 

off.  If AC adapter is not used (batteries only), time and/or image projector will turn off 

automatically in 10 minutes.

Time and Space Image Projector

Отзывы: