Umuzi Cleaning UZ-PC-ADP01, Руководство пользователя

Страница: 7 / 30

Filling the tank
• Gently loosen the main body (C) from the tank (D) by turning it counterclockwise.
• Remove the tank (D) from the main body (C)
• Fill the tank with liquid soap or disinfecting gel.
• Do not overfill the tank (280 ml Max).
• Place the main body (C) back on the tank (D) by turning it clockwise.
EN-5
Note! When the battery level is low, the LED indicator on the power button (1) lights up red when holding
your hand under the motion sensor (B).
Setting the dispensing dose
• Press the power button (1) once. The LED indicator flashes once
Low: 1 - 1.5 ml.
• Press the power button (1) again. The LED indicator flashes twice
Medium: 2.5 - 3 ml.
Note! Only use fresh new soap and clean the tank properly before each re-fill.
Note! Do not fill the tank with exfoliant soaps.
Note! The device is suitable for alcohol disinfectant with an alcohol content of ≤ 75% (gel sanitizers) or
liquid soap. The device is not suitable for alcohol liquid (pure water liquid).
Powering the device ON/OFF
• After the batteries have been placed, press the power button (1) once. The LED indicator flashes once.
• There is no need to power off the device, as the sensor is in standby mode.
• In case you want to switch off the device, press the power button (1) until the LED indicator flashes red.