UMS 7-90 cc Скачать руководство пользователя страница 3

3

•  Always ensure the aircraft is secure and will not move once the engine is started.

•  Always rebind your transmitter to your receiver(s) after setup and before rst ight.

•  Always ensure the throttle failsafe is set to low throttle in your transmitter.

•  Always perform a range check prior to ight. 

•  Always cut off the fuel supply (pinch or disconnect the fuel line to the carburetor) or use  

the throttle linkage to shut off the air in order to stop the engine.

•  Never use hands, ngers, or any other body part to stop the propeller.

•  Never throw any object into a propeller to stop it.

•  Never run the engine in the vicinity of loose small objects, such as gravel or sand, to avoid 

the propeller uncontrollably throwing such materials. 

•  Never wear loose clothing or a loose neckstrap when operating your model engine as these 

items could become entangled in the propeller.

•  Never have loose objects such as screwdrivers, pencils, etc. in your pockets when operating 

your model engine. These could fall into the propeller.

•  Never allow fuel to come into contact with eyes or mouth. Gasoline and other fuels used  

in model engines are poisonous.

•  Always ensure gasoline and fuel are stored in a clearly marked container away from  

the reach of children.

Safety Warnings 

Model engines produce a substantial amount of power, which can create unsafe situations if not 
used correctly. Always use common sense and observe all safety precautions when operating, 
handling or performing any procedure involving your engine. Failure to follow safety precautions 
could result in serious injury and property damage.

•  Always ensure spectators, especially children, are at least 30 feet away when running  

the engine.

•  Always ensure that the propeller is securely attached to the engine shaft and all retaining 

fasteners are tightened properly before EACH ight. Use of blue threadlock to tighten nuts  
is advisable.

•  Always keep small parts out of the reach of children as they can be choking hazards.

•  Always secure the airplane before powering the engine.

•  Always keep your face and body away from the path of the propeller blades when starting  

or running your engine.

•  Always stand behind the propeller when making carburetor adjustments.

•  Always wear safety glasses or goggles when starting and running your engine.

•  Always keep your fuel in a safe place away from sparks, heat or anything that can ignite.

Содержание 7-90 cc

















Отзывы: