Umirs Europe Ltd. Predix
- 21 -
The following parameters are shown here:
Firmware version
Type of the connected device: transmitter or receiver
Serial nmber of the device
Maximal operating range
Temperature (this function is only available at devices with firmware version 3.9T/R or later)
Power supply voltage (this function is only available at devices with firmware version 3.9T/R or
later)
Delivered frames
Failed frames (growth of this parameter shows a communication error between the computer and
the device)
You can change the network address of the connected device in the „Network config” / „Network
address” box. Choose „Modify” to change the parameter.
You can also change the communication speed in the „Rate” box.
To save the changes press „Apply”.
After the change of network address the device will be accessible on the network address, given by
You.
Programming the receiver:
For the programming of the receiver go to
the Receiver bookmark at the bottom of
the window.
Press „Begin” than choose „Modify” to
carry out the programming
First
, choose the frequency channel from 1
to 250 that You would like to use.
Than,
choose the detection threshold
In „auto” mode the receiver sets the
detection threshhold automatically.
In automatic mode the detection algorythm
adapts to the slowly changing of the
detectors environment (snowfall, growing
grass), thus preventing false alarms from
natural effects.
You can also choose a detection threshold
manually from -1 to -15(dB).
