4.6
PLACING A LOAD
Always place a load onto the platform
gently. Sudden shock/excessive force
may cause damage to the weight sensor
inside. It is a good practice to remove
all loads from platform immediately
after weighed. This would prolong the
life time of the weight sensor.
4.7
SELECT BACKLIGHT (option) STATUS
To enable/disable backlight function,
press MODE until the desired status is
attained.
Backlight
would
automatically go off 3 second after zero
weight is detected and automatically
turned on immediately after a load is
detected.
4.8
WEIGHT MEMORY FUNCTION
4.8.1
Save a Weight to Memory and Auto Weight
Accumulation
When weight display is stable, press M+
to save. Scale Displays “
P.1
” and the
M+ arrow appears indicating total number
of total entries and the memory function
is being employed.
4.8.2
Recall Weight Accumulated
Press
MR
, scale displays total number
of entries and total accumulated weight
of these translations. Scale return to
normal operation status 2 seconds after
accumulated weight displayed.
4.8.3
Memory Clear
Press and hold
MR
, then press
TARE
after
accumulated
weight
display.
Scale
displays “
P.0
” and all data is cleared.
4.8.4
CAUTIONS
ALL data stored will be erased if:
the scale is turned off
weight unit is changed
4.9
SELECT AUTO POWER OFF STATUS
This unit is equipped with AUTO POWER
OFF function.
Default setting = auto off after 4 minutes
unused.
Follow the below steps to disable/employ
the AUTO POWER OFF function.
a.
turn scale off
