UMC W32/28-GB-TCU-UK Скачать руководство пользователя страница 23

Страница: 23 / 29

Helpline No UK. 0871 2000 463 ROI. 01443 3940

Web Support: www.skymediauk.co.uk

General Information

USING YOUR TV WITH A SKY DIGITAL SET TOP BOX

Option 1) Connecting your TV to your Sky box (when both the TV and Sky Box are
located in the same room)

Depending on your Sky Box & TV model, connect either by SCART or HDMI cable
(available separately)

If connecting by SCART, select the ‘Input source’ on the TV as SCART.

If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has more
than 1 HDMI port, ensure you select the input source to match the HDMI numbered port
on the rear of the TV)

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky
remote control (Revision 9 or later) and you will need to programme a 4 digit code into
it. See bottom of this page.

Option 2) Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV)

Please note, if you are adding a ‘Magic Eye/TV Link’ to your system so that you can use your Sky remote control
to change the Sky channel in the room where the 2nd TV is located, please refer to the instructions included with
the TV link/magic eye in order to ensure the RF or RF2 output on your Sky box is powered on. (The red LED light
on the TV link/magic eye will light up if the RF / RF2 output is correctly set up) If you do not have the instructions
that came with the TV link/magic eye, instructions on how to do it can be found on our web site.

1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.
2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you
no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)
3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per
point 2 above.
4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue
Manual tuning (refer to the Tuning/Channel menu section of this user guide if necessary)
5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the
Sky box/channel is found, press ‘OK’ to store it.

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control (Revision 9 or
later) and you will need to programme a 4 digit code into it. See below.

Using a Sky Remote or a Universal Remote to operate your TV

Sky Remote Control,

If you wish to use your Sky remote to operate the basic functions of your TV, you need to

programme a 4 digit code into it. Please note. you will need the latest Sky Revision 9 remote control as this is the
only version that includes the latest software/ﬁ rmware necessary to operate this model of TV. All codes can be
found on our website. If you wish to upgrade/replace your existing Sky remote control to the latest version, you
can do so on our web site.

Universal Remote Control,

If you wish to use a Universal remote control to operate your TV, please refer to the

web site for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you
have an alternative brand of Universal remote, please refer to the manufacturer for the code.)

RF OUT

RF/COAX cable from
Sky Box to 2nd TV

Connect to RF
or RF2 output
on the Sky box

Connect to the
Aerial/RF input
on the 2nd TV

TV Link/Magic Eye
(optional)

2nd TV in
another room

Sky Box

SCART
or HDMI
cable

Sky Box

SCART
or HDMI
cable

Manual - UMC- 32-28G-GB-TCU-UK.indd Sec1:26

06-Mar-12 9:15:34 AM