6
GETTING STARTED - INITIAL SET UP
TUNING IN ANALOGUE TV
IMPORTANT
—
If you do not have Digital TV
(Freeview) in your area or wish to tune in via
the analogue signal please follow the below.
1) First you must switch the TV to "TV" mode
Press [TV/AV/PC]
The Source Menu will appear
2) Using these buttons
highlight 'TV'
3) Press [OK]
The following should now appear if it does not
please refer to the Manual
4) "Yes" should be highlighted
Press [OK]
The TV channels will now tune in.
After tuning is complete the below screen will appear.
You may wish to change the order of the channels.
5) Press [RED] button to select the channel you wish
to move.
6) Using these buttons
move to the location
where you would like
this channel
7) Press [OK] to confirm
location.
The channel is now moved.
Repeat this process until all the channels are in
the order which you would like them.
DVB
TV
AV
SCART
YPBPR
HDMI
DVD
PC-RGB
Use Scroll on
remote control to
select input source
and press OK