Quick Start Guide
This section serves as a quick reference to the connection and installation procedures for the
PowerLook 1100 scanner.
1.
Unpack your Scanner
Unpack your scanner. Make sure that all the scanner system hardware, software, cabling, and
documentation items indicated on the packing list are present.
2.
Unlock your Scanner
Before using your scanner ensure that the carriage lock of scanner is in the unlocked position. Insert
a coin in the thumbscrew of the
optical assembly lock
and turn it firmly counterclockwise to unlock
the optical assembly to avoid damaging the optics during transportation.
3. Connect the FireWire (IEEE 1394) Cable
Connect the FireWire (IEEE 1394) cable to the built in port of host and the other end of the cable to
the scanner.
4. Connect
the
Power
Connect the power cord to the scanner and plug the other end of the power cord into an available
outlet (socket).
5. Power
Up
a) Turn the scanner power switch on. When the Ready indicator is on, your scanner is ready to
use.
b) Turn on your computer.
6. Software
Installation
We recommend that you install your image editing software first and then MagicScan.
a)
Insert UMAX MagicScan CD into your CD-ROM drive.
b) Double-click on the MagicScan installer icon to start installation.
c)
Follow the on-screen instructions to completely install MagicScan.
4