DuraMax
ENGLISH
Operation
Setting up:
Position the device on a level surface or on a tripod.
• Press the "ON/OFF" switch.
• The device automatically levels itself within a range of ± 5°. When levelling
has been completed, the laser rotates at maximum speed. The DuraMax is
in hand receiver mode. The operating display (F) is lit up. The laser beam
can now be received using the SensoCommander.
Slope mode:
• The SLS adjusts the X and Y axes. However, if it is intended to project an
incline, SLS must be switched off.
• To project an aincline, press the auto/man (J) button. The X axis can now
be adjusted, and the X axis display (I) lights up. To adjust the inclination of
the Y axis, press the tilt button (D); the Y axis display (E) lights up.
• Adjustment of the X and Y axes is done using the SensoCommander. To
do this, press buttons 15.
18
Note:
If the device is too far off the horizontal (more than 5°), a warning
signal will sound and the rotor head will stop. In this case, the device must
be repositioned on a more level surface.
In one plane
In two planes
Note:
The DuraMax is characterised by great ease of operation and is only
equipped with hand receiver mode and tilt mode. For this reason, not all the
buttons on SensoCommander 120 and Pro are used.
