－
10
－
4.2.2 Reassembling the filter element
(1)
Ensure that the mounting surface of the filter element in the oil
mist trap is free from foreign matter and scars.
(2)
Mount the filter element in the oil mist trap.
(3)
Mount the filter keep plate in position.
(4)
Mount the seal washer (M10) and fix the filter element using the
spacer nut.
(5)
Mount the parts of pressure relief valve.
CAUTIONS:
① Tighten the hex nut (M10) until it comes into contact with the spacer
nut. (The pressure relief valve is activated at a pressure below 0.03
MPa (0.3 kg/cm
2
) (gauge Pressure).
(6)
Mount the O-ring in the O-ring groove of the oil mist trap. (Apply a
thin uniform coat of vacuum grease until the luster of the O-ring
surface changes.)
(7)
Mount the flange in position and tighten it with the hex nut (M10).
This completes the mounting of the filter element.
