- 13 -
4.7 Installation of the oil mist trap (Option)
An oil mist trap can be installed in order to remove oil mist from the pump. As such an oil mist
trap, models OMT-050A and OMS-050 are available. Remove the standard exhaust port from
the exhaust port of the pump and install an oil mist trap instead. The oil mist trap not only
prevents oil mist generation but also reduces exhaust noise.
For details, refer to the instruction manual for the oil mist trap.
4.8 Restriction on operation when the oil mist trap is installed
When using the oil mist trap, there are some restrictions on operation. When the filter is clogged,
replace it.
The internal pump pressure is limited to 0.03 MPa (gauge pressure). When the pressure
measured at the outlet side has reached 0.03 MPa (gauge pressure), replace the oil mist trap
filter.
Be sure to observe the restrictions on operation when the oil mist trap is
installed. There is a risk of explosion. When the filter is clogged, replace
it.
Warning
