Typical Characteristics:
HIGH POWER “C” SERIES
HIGH VOLTAGE POWER SUPPLY
Specifications subject to change without notice
TEL 800-9HV-POWER or 800-948-7693 or 631-471-4444 FAX 631-471-4696
www.ultravolt.com
1800 Ocean Ave., Frnt, Ronkonkoma, NY 11779
“Making High Voltage Easier!”
®
20
Parameter
Conditions
Models
Units
Input:
All Types
Voltage Range
Full Power
+ 23 to 30
VDC
Voltage Range
Derated Power Range
+ 11 to 32
VDC
Current
Standby / Disable
< 40
mA
Current
Max Load, Extended Input Voltage
Figures A & B
Graph
AC Ripple Current
Nominal Input, Full Load
< 50
mA p-p
Output:
1/8C
1/4C
1/2C
1C
2C
4C
6C
Voltage Range
Nominal Input
0 to 125
0 to 250
0 to 500
0 to 1,000
0 to 2,000
0 to 4,000
0 to 6,000
VDC
Power
Nominal Input, Max Eout
60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 Watts
Current
Iout, Entire Output Voltage Range
480 1000 2000 240 500 1000 120 250 500 60 125 250 30 62 125 15 31 62 10 21 42
mA
iMon Scale Factor
Full Load
400 833 1667 200 417 833 208 208 417 50 114 227 26 52 104 11.5 26 52 6.2 17.7 35
mA/V
Ripple
Full Load, Max Eout, Cload ≥0.5uF
< 1.0
< 1.0
< 1.0
< 1.0
< 1.0
< 1.0
< 1.0
V p-p
Overshoot
C Load, 0 Eout to Full Eout
< 1V
< 1V
< 1V
< 1V
< 1V
< 1V
< 1V
V pk
Voltage Derating
Max Iout, Extended Input Voltage
Figure C
Graph
Rise Time
Max Iout, Various C Loads & Eouts
Figures D & F
Table
Line Regulation
Nom. Input, Max Eout, Full Power
< 0.01%
VDC
Static Load Regulation No Load to Full Load, Max Eout
< 0.01%
VDC
Stability
30 Min. warmup, per 8 hr/ per day
< 0.01% / < 0.02%
VDC
Output Voltage Monitor:
All Types
Voltage
Full Eout Range, Full Iout Range
10.00
V per kV
Proportionality
Full Eout Range, Full Iout Range
± 0.08%
V per kV
Remote Programming:
All Types
Input Impedance
Nominal Input
+ Output Models 1.1MΩ to GND, - Output Models 1.1MΩ to +5 Vref
MΩ
Adjust Resistance
Typical Potentiometer Values
10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust)
Ω
Adjust Linearity
0% to 100%
Figure E
Graph
Adjust Voltage
Referenced to signal ground
Figure E (0 to +5 VDC)
Graph
Adjust Logic
0 to +5 for +Out, +5 to 0 for -Out
+4.64 VDC for +Output or +0.36 for -Output = Nominal Eout
Reference:
All Types
Output Voltage
T=+25°C, Initial Value
+ 5.00 ± 2%
VDC
Output Impedance
T=+25°C
464 ± 1%
Ω
Stability
Over Full Temperature Range
See “A” Series Datasheet Figure F
Graph
Enable:
All Types
Power Supply On
Floated, or voltage ≥ TTL High
+2.4 to 32
VDC
Power Supply Off
Grounded, or voltage ≤ TTL Low
0 to + 0.7 ± 0.2 (Isink 1mA minimum)
VDC
Temperature & Humidity:
All Types
Humidity
All Conditions, Standard Package
0 to 95% non-condensing
Operating
Full Load, Max Eout, Case Temp.
-40 to +65
°C
Storage
Non-Operating, Case Temp.
-55 to +105
°C
Coefficient
Over the Specified Temperature
± 50
PPM / °C
Thermal Shock
Mil-Std 810, Method 503-4, Proc. II
-40 to +65
°C
Altitude:
All Types
All Conditions
Standard Package
Sea Level through Vacuum
Shock & Vibration:
All Types
Shock
Mil-Std-810, Method 516.5, Proc. IV
20
G’s
Vibration
Mil-Std-810, Method 514.5, Fig. 514.5C-3
10
G’s
Packaging:
60W/125W
250W
Material
Outer construction
Aluminum Alloy 5052-H32, Finish: Mil-C-5541 Class 1A
Aluminum Alloy 5052-H32, Finish: Mil-C-5541 Class 1A
Length
Not including pins or mounting pts
4.00 ± 0.025 (101.6±.6)
8.00 ± 0.025 (203.2±.6)
In (mm)
Width
Not including pins or mounting pts
4.50 ± 0.025 (114.3±.6)
4.50 ± 0.025 (114.3±.6)
In (mm)
Height
Not including pins or mounting pts
1.075 ± 0.025 (27.3±.6)
1.075 ± 0.025 (27.3±.6)
In (mm)
Volume
Not including pins or mounting pts
19.35 (317)
38.7 (634)
In³ (cc)
Weight
Overall
1.4 (.64)
2.6 (1.18)
Lbs (kg)
