GB
DISTRIBUTOR:
Sza-Co Kft.
H-6000 Kecskemét, Izzó u. 2.
+36-30-99-11-537
[email protected]
www.ultratech-world.com
FAN HEATER
UT-H2000C
1. Use the heater on flat surfaces not tilting or upsides down. Not to be used
underneath.
2. Do not use your heater in the presence of explosive or flammable substance.
3. It is absolutely necessary to ensure the followings:
- The socket is not used to the heater and other high power electrical appliance at a
time.
- The cord is rated for at least 10 AMPS.
- Tight connection between plug and socket so as to avoid the overheating plug and
malfunction.
- Unplug heaters by grasping plug and pulling it from the socket. Never pull on cord.
- Always use with supervisor.
- Caution: Do not drape anything on your heater when in use.
4. Children must be over the age of 8 years to use this device. Those with impaired
mental or physical abilities, or with poor sensory functions, and who do not have
enough skills and experiences, may only use it when being supervised by healthy
adults, or if they have received instructions for the safe use of the device, and have
fully understood the dangers which may accompany the use. Children must not
play with the device. Its cleaning or maintenance by the user may only be performed
by adults.
5. Children under the age of 8 have to be kept away, unless they are under constant
supervision.
6. In order to avoid overheating, the device must not be covered.
7. Some parts of this device may become very hot, and may cause burn injuries. You have
to be especially careful when children and handicapped people are also present.
8. The device can only be used once in a while, or for heating well-insulated rooms.
1. Plug into any 220-240V~ source
2. Your heater is equipped with a 4-position rotary switch
3. Set the rotary switch to maximum for fast warm up of a room. Once the room is
comfortable, select a lower setting to reduce electrical consumption and to prevent the
room from becoming too warm.
4. Adjust the thermostat to maximum and select the desired power setting. Once the
room is comfortable, rotate the thermostat counterclockwise, until the heater shuts off.
The thermostat will now maintain the temperature by cycling the heater on or off. During
particularly cold weather, the low power setting may be insufficient to satisfy the ther-
mostat. Select a higher setting for these periods.
5. It is better to work for 5-10 seconds in only fan mode before turning off the fan.
The heater comes equipped with a safety tip over switch. It will cut off the power due to
accidental knocking over.
1. When your heater needs cleaning, wipe exterior surfaces of the heater with a
moistened cloth. Do not rinse with water directly. Be sure to unplug before cleaning.
2. To prolong the heater life, do not disassemble it personally when malfunction
occurs. Send your heater to relative identification after-sold service center or
provider for the convenience inspecting
9. Use it at least 100 cm away from combustible materials.
10. If the electric cable is damaged, it may only be replaced by the manufacturer, repair
stations, or properly qualified experts, to avoid possible dangers.
Welcome to use UT-H2000C fan heater!
Thank you for buying our product. Please attentively read this before operating the
machine. Keep this operation manual for future reference.
1. ROTARY SWITCH
2. PILOT LAMP
3. THERMOSTAT
4. HANDLE
INSTRUCTION
SPECIFICATION
PARTS OF THE PRODUCT
CAUTION
OPERATING INSTRUCTIONS
SAFETY TIP OVER SWITCH
MAINTENANCE
Power supply
220-240V~
Power
2000W
Suitable area
15-20 m
2
3
4
1
2
SYMBOL
FUNCTION
0
OFF
COOL AIR
I
HALF HEAT OUTPUT
II
FULL HEAT OUTPUT
