Ultratec Uniphone 1150, Руководство пользователя

Страница: 32 / 62

3 0 • V C O C A L L I N G
Answering a VCO call
Answering a VCO call is the same as answering a text call. After the
conversation has begun, do the following:
1.
Tell the other person you want to use VCO.
2.
Pick up the handset. you see CCITT VCO-MENU THEN V on the display
screen.
3.
Press
Menu
+
V
to turn on VCO. You see VOICE MODE PRESS SPACE
FOR TEXT on the display screen.
4.
When you are finished speaking, press the
Spacebar
to reconnect into to reconnect into
text mode. You do not need to replaced the handset.
5.
Repeat steps 3-4 until your conversation is finished.
6.
When the conversation is finished, hang up the handset and then hold
down either
Shift
key and press the
TTY On/Off
key. key.
Note:
After you pick up the handset, you may see this display screen:
TEXT TELEPHONE-VCO
This display screen means your call connected using Baudot, EDTN, or
Turbo Code. You do not need to press
Menu
+
V
each time you want to
speak. Begin speaking when you see this display screen.
Using hearing carry-over (HCO)
For people who can hear but do not wish to speak, the Uniphone 1150 can
make HCO (hearing carry-over) calls. HCO is the opposite of VCO. You type
to the other person and listen to the other person's reply. Follow the VCO
procedures on pages 28-29.