Ultratec SUPERPRINT 4425, Инструкция по использованию

Страница: 14 / 98

The picture on the previous page shows how to set up for direct connect
use. Direct connect means that the telephone line is plugged directly into
the Superprint 4425. You do not need a telephone. When you use direct
connect, you can dial directly from the keyboard and use auto-answer.
You can also connect by putting a telephone handset in the acoustic cups
if for some reason you cannot plug a telephone line into the Superprint
4425. See
Acoustic calling and answering on page 28 for more
information.
Charging the batteries
The AC adapter supplies electricity to the Superprint 4425 and charges
the batteries. Leaving the AC adapter plugged in will not harm the
Superprint 4425 or the batteries.
Leave the AC adapter plugged in for 24 hours to charge the batteries
when you set up your Superprint 4425. You can use the Superprint 4425
at the same time. Fully-charged batteries will provide 45 to 60 minutes
of normal use. For more information on using battery power, see
About
the batteries on page 75.
What kind of telephone line?
When the telephone line is directly connected to the Superprint 4425,
you need a standard (analog) telephone line with either pulse or tone
dialing. If you plan to use the Superprint 4425 in an office, the line may
need modification because many offices have digital telephone systems.
Contact your telephone installer to insure your line supports a standard
single-line telephone. This is the same kind of line you need for many fax
machines or computer modems.
Setting pulse or tone dialing
Your Superprint 4425 comes set for tone dialing, which is used by most
telephone lines. If your line uses pulse dialing, make sure the Superprint
4425 is set to use pulse dialing. For more information, see
Setting pulse
dialing on page 66.
1 2 • S E T U P