Revision 7 (Feb 2019)
Mounted.
The forward Screw pointed at the Yoke is treaded in, making
contact with and stabilizing the Yoke. Tightening (or loosening) that forward
screw can be used to tweak the set lateral position.
Now, - final setting of the aligned HOME position
4.3.2
The Position 1 “Home” position.
You have already mounted the Lateral Stop Bracket.
Aligning the Mast to the Drive Motor-
Lateral
alignment of the Mast in relation to the
tools driven by the Drive Motor is important. It establishes a 0 reference that relates
to the stepped positions of the work piece. Alignment, and repeated alignment, if
that becomes necessary, typically takes a few minutes. Here it is, step by step:
a) Ready the Drive Motor.
Insert one of the nominal 6 mm Dops into the Collet, and
lock it there.
b) Ready the Mast.
Mount the Mast onto its Mounting Plate. Don’t worry about
the exact position
– it will be adjusted later.
4.3.3
You have already mounted the Lateral Stop Bracket.
Insert one of the nominal 6 mm Dops into the Quill, and lock it there.
c)
Offset the Y position
In
– away from the front edge – about 6.5 mm (reading on
the indicator). Use the Adjustment Knob.