Ultratec CrystalTone Plus Скачать руководство пользователя страница 13

Страница: 13 / 16

SPECIFICATIONS

■

FCC information

This equipment generates and uses radio frequency
energy and if not installed and used properly, that is, in
strict accordance with the manufacturer’s instructions,
may cause interference with the radio and television
reception. The

CrystalTone Plus

has been tested and

found to comply with the specifications for a Class B
computing device in accordance with the specifications
in Subpart J of Part 15 of the FCC Rules. These rules are
designed to provide reasonable protection against radio
frequency interference in residential installations.
There is no guarantee that interference will not occur
during use. You can determine if this equipment causes
interference to radio or television reception by turning
the

CrystalTone Plus

on and off while the television or

radio is on.
If this equipment does cause interference the user is
encouraged to try to correct the interference by one or
more of the following measures:
– Reorient the radio or television receiving antenna.

– Move

the

CrystalTone Plus

further away from the

radio or television.

– Plug

the

CrystalTone Plus

into a different outlet so

it is on a different branch circuit than the television
or radio.

– If necessary, consult an experienced radio/television

technician or the manufacturer for additional sug-
gestions.

The user may find the following booklet prepared by the
Federal Communications Commission helpful:
Interference Handbook. This booklet is available from
the Superintendent of Documents, U.S. Government
Bookstore, 310 W. Wisconsin Ave., Suite 150, Milwaukee,
WI 53203, (414) 297-1304 (voice).
This equipment complies with Part 68 of the Federal
Communications Commission (FCC) rules for the
United States.
The telephone jack used on the

CrystalTone Plus

complies with FCC Part 68, Subpart F rules and
regulations and is an RJ11C.

A label is located on the underside of the

CrystalTone

Plus

containing the FCC registration number and the

Ringer Equivalence Number (REN). You must, upon
request, provide the following information to your local
telephone company: USOC Jack Type: RJ11;
REN: 1.1.
Should you experience trouble with this telephone
equipment, please contact:

Ultratec National Service Center

5901 Research Park Blvd.

Madison, WI 53719

email: [email protected]

The REN is used to determine the quantity of devices
which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but
not all, areas the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs,
contact the local telephone company.
If trouble is experienced with your

CrystalTone Plus

, for

repair or warranty information, please contact Ultratec
Inc. Customer Service at (608) 238-5400 (V/TTY). If the
equipment is causing harm to the telephone network,
the telephone company may request that you disconnect
the equipment until the problem is resolved.
This equipment cannot be used on public coin phone
service provided by the telephone company. Connection
to party line service is subject to state tariffs.
Your telephone company may discontinue your service if
your equipment causes harm to the telephone network.
They will notify you in advance of disconnection, if
possible. During notification, you will be informed of
your right to file a complaint to the FCC.
Occasionally, your telephone company may make
changes in its facilities, equipment, operation, or
procedures that could affect the operation of your
equipment. If so, you will be given advance notice of the
change to give you an opportunity to maintain
uninterrupted service.
Other than replacing the batteries, the