5
ULTRASONICPOULTRYSYSTEMS.COM
IMPORTANT
SAFEGUARDS
Read before installing or using the
equipment
Your Ultrasonic Welding system has
been designed with safety in mind.
However, no design can completely
protect against improper usage, which
may result in bodily injury and/or
property damage. For your protection
and equipment safe-guard. observe the
following warnings at all times, read the
operating instructions carefully before
operating the equipment, and retain this
instruction manual for future reference. If
the Ultrasonic Welding System is used in
a manner contrary to that specified in
this instruction manual,the protection
features designed into the unit may be
impaired.
● High voltage is present in the power
supply. Do not remove the cover. Refer
all servicing to qualified service
personnel. Removing the cover may
void the warranty.
● Never operate the power supply unless
it is connected to the hand gun
(convener).
● Never secure anything to the tip
INSTALLATION
Inspection
Prior to installing the Ultrasonic Welding System,
perform a visual inspection to detect any evidence of
damage, which might have occurred during
shipment. Before disposing of any packaging
material, check it carefully for small items.
The Ultrasonic Welder System was carefully packed
and thoroughly inspected before leaving our factory.
The carrier, upon acceptance of the shipment,
assumed responsibility for its safe delivery. Claims
for loss or damage sustained in transit must be
submitted to the carrier.
If damage has occurred, contact your carrier within
48 hours of the delivery date. DO NOT OPERATE
DAMAGED EQUIPMENT. Retain all packing
materials for future shipment.
Electrical Requirements
The Ultrasonic Welder requires a fused, single
phase electrical outlet capable of supplying 60 Hz at
110 volts or 220 volts. Contact Ultrasonic Poultry
Systems for the right plug for your region.
Safety
Operating the equipment with voltages different from
those specified, or with voltages with high power
translents, will cause components within the power
supply to fail.
Preparation for Use
1.
Connect the converter cable to the power supply.
2.
Plug the electrical line cord into the electrical
outlet, and press the power button.
3.
If the converter/tip assembly is not already
assembled; screw the tip into the converter and
secure with wrenches provided.
4.
The following pages show standard tip.
Custom tip are available to suit your needs.
3971 Hoover Rd. #291. Grove City, OH 43123
