background image

Incorrect polarity connected.

The battery is interrupted.

The Battery connection is wrong.

The balance connect is wrong.

Input voltage less than 11V.

Input voltage higher than 18V.

Voltage of one cell in the battery pack is too low.

Voltage of one cell in the battery pack is too high.

Voltage of one cell in the battery pack is invalid.

The cell number is wrong.

The internal temperature of the unit goes too high.

The external temperature of the unit goes too high.

The battery capacity is more than the maximum

capacity which the user sets.

The charging time is longer than the maximum

charging time which the user sets.

The battery voltage is higher than the maximum

voltage which the user sets when charging in

balance mode.

CONNECT ERROR
CHECK  MAIN  PORT

CELL NUMBER
INCORRECT

CELL ERROR
HIGH VOLTAGE

CELL ERROR
LOW VOLTAGE

INT.TEMP.TOO HI

DC IN TOO LOW

DC IN TOO HIGH

BATTERY WAS FULL

CELL ERROR
VOLTAGE-INVALID

EXT.TEMP.TOO HI

OVER CHARGE
CAPACITY LIMIT

OVER TIME LIMIT

BALANCE CONNECT
ERROR

WARNING AND ERROR MESSAGE

It incorporates a variety of functions for the systems to verify processes

and the state of the electronics. In case of an error the screen will

display the cause of error and emit an audible sound.

28

Содержание UP400AC Duo

































Отзывы: