My equipment won’t turn on
1. Check if it is plugged into the “Always On” or
“Energy Saving” Outlets.
2. Switch the “Energy Saving Outlets” on with the
“LEARNING” button.
USB Remote can’t turn on or off my equipment
1. Check if it is plugged into the “Always On” or “Energy Saving”
outlets.
2. The USB Remote is out of its effective range.
3. Press the button on the USB Remote, if the red LED light does
not blink, replace the CR1632 3V Lithium battery in the remote.
4. Re-synchronize the USB Remote with PG-805.
Red Ground Fault LED is on
The red Ground Fault LED indicates improper home wiring.
Consult a licensed electrician to resolve the issue. UltraLink
®
is not
responsible for damages caused by improper wiring.
USB device does not charge
Exceeding 1.5 amps triggers the overload protection circuit and
disables charging. Unplug your portable device and ensure it does
not exceed a total draw of 1.5 amps.
8
9
Trouble Shooting Guide
Wall-Mount Your Surge Protector
1. Locate the mounting holes on the back
of the PG-805 for wall or baseboard
mounting.
2. Install screws (not included) on wall or
baseboard surface leaving at least ¼-inch
of the screw exposed.
3. Place and secure the PG-805
onto screws.
Specifications
Electrical Rating
15A / 120V, 60Hz, 1800 Watts
Surge Suppression
2160 Joules
Clamping Voltage
330 V
USB Charger
2 ports (5V, total 1.5 Amps)
Phone Line/
Network Protection
(RJ11) & (RJ45)
Stand-by power
<0.7W
USB Remote Wireless Range
Up to 25 feet (Open Space)
USB Remote Battery Type
CR1632 3V Lithium battery
Содержание Planet Green PG-805
Страница 3: ...PG 503 User Guide...
Страница 12: ...PG 805 User Guide...